Click image to view full size image
Fabric Phenolic sheets for structural and mechanical applications. Phenolic is a hard, dense material made by applying heat and pressure to layers of fabric, impregnated with a synthetic resin.
These phenolics are approximately half the weight of aluminum and their physical toughness resists abrasion, friction, impact and material fatigue. It has special properties that fight off the corrosive action of water and many chemicals, increasing the service life and efficiency of your product parts.
Specifications:
1) Thickness: 0.5-120mm
2) Width x length: 1020 x 1220mm; 980 x 1980mm; 1000 x 2000mm
Applications:
It is used for the insulating spare parts of electrical appliances and transformers, textile machines, gears, fixed frames for bearings and noise reduction.
Technical Data:
|
Item |
Unit |
Value |
|
Density |
g/cm3 |
1.45 |
|
Heat resistance |
℃ |
140 |
|
Water absorption |
% |
<1.5 |
|
Flammability class |
UL94 |
HB |
|
Bending strength |
MPa |
≥120 |
|
Compression strength |
MPa |
≥250 |
|
Tensile strength |
MPa |
≥100 |